Ricoh IM 5000 Series User Manual

Replenishing the Staples
Contact your consumable supplier and prepare new staples for replenishment when the "Staples are
almost out." message is displayed. Replace the staples after the message prompting replacement is
displayed on the control panel.
• When operating the machine, do not put your hand inside the booklet finisher tray of the
finisher's staple unit. You may trap your fingers in the machine's gap and injury can result.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
Confirming the supplier of consumables
Press [Machine Information] on the [Check Status] screen to display the telephone number for
ordering consumables.
See "Contact Information", User Guide (Full Version).
Replenishing the staples
Replenish the staples while watching the video displayed on the screen for the procedure.
1. Press [Watch Video].
D0C9PA8225
Press [Check Status] and then press [Check] under [Machine Status] tab.
2. Press the play ( ) key.
3. Replenish the staples while watching the video.
• If you cannot raise the upper unit by holding on both ends of the cartridge, there are staples still
remaining inside. Continue using the machine without replenishing the staples.
Replenishing the Staples
221

Ricoh IM 5000 Series Specifications

General

Bypass Tray	100 sheets
Print Speed (Black)	50 ppm
Print Resolution	1, 200 x 1, 200 dpi
Maximum Paper Size	A3
Memory (RAM)	2 GB
Compatible Models	IM 5000, IM 6000
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Paper Tray Capacity	500 sheets
Maximum Paper Capacity	4, 700 sheets
Finisher Options	Booklet Finisher
Additional Paper Trays	Available (optional)
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing	Mopria
Control Panel	10.1-inch Smart Operation Panel
Hard Disk Drive	320 GB
Power Consumption	1, 500 W (max)