3.System Maintenance
35
3. System Maintenance
System Maintenance
Maintenance Modes
Service program (SP) modes for the Smart Operation Panel are as follows:
Mode Use Notes
SP Mode (MFP) SP modes for the MFP (controller,
engine)
The numeric keys are required to enter this mode.
Display the soft keys of the GW application or of the
SP mode.
Service mode
(control panel)
SP modes for the Smart Operation
Panel.
• Changing SP mode settings in
the Screen Features menu.
• Installing and updating
applications that can be
installed
Same as above
Recovery mode Maintenance modes for the
Android OS
• Updating firmware
• Initializing all data
-
Login to/Logout from Control Panel Service Mode
Login
In the same way as you log in to the SP Mode on the MFP, you use the soft keys to enter a combination of
numbers in order to login to the service mode of the control panel.
• You cannot log in to the service mode of the control panel when one of the following screens is
displayed.
• Stop All Jobs
• User Tools
• Address Book Management
Use the numeric keys on one of the following screens.
• Soft keys on the GW application screen
• Soft keys for the control panel’s service mode (displayed by pressing both the [EX3] key and [Check Status]
at the same time)
To Next Page
Loading...
Need help?
General