3.SP Mode Tables
375
Toner Supply/ Transfer
Input Check
No. Part Name SP Name SP No. Reading
0 1
2 Toner end sensor (C) Toner End Sensor: C 5-803-024 Not end End
4 Toner end sensor (M) Toner End Sensor: M 5-803-023 Not end End
6 Toner end sensor (Y) Toner End Sensor: Y 5-803-022 Not end End
8 ITB contact HP sensor Image Transfer Contact HP Sensor 5-803-016 Contact Not contact
Output Check
No. Part Name SP Name SP
No.
Remark
1 Toner supply
motor (K)
Toner Supply
Motor: Bk
5-
804-
038
Operation : Run the toner supply motor for 1.5 sec..
Notes :
• If you want to run again, do it after executing SP3-011-
001 (Normal ProCon) or printing 1 or more sheet(s) in
full color mode.
• If you run without obeying the above-mentioned
operations, following failures may occur.
• The toner supply unit and PCDU are damaged,
and units replacing is required.
• Toner can scatter inside and outside the machine
from the supply unit.
3 Toner supply
motor (C)
Toner Supply
Motor: C
5-
804-
037
5 Toner supply
motor (M)
Toner Supply
Motor: M
5-
804-
036
7 Toner supply
motor (Y)
Toner Supply
Motor: Y
5-
804-
To Next Page
Loading...
Need help?
General