1.Installation
11
4. Attach the handset bracket [A] to the upper left cover by securing two screws to the frame of the machine
through the screw holes [B]. (tapping screw)
5. Attach the cradle [A] to the bracket. (flat head screw)
6. Connect the handset cable connector to the “TEL” connector of the mainframe.
Fax Connection Unit Type M28 (D3E7-00)
Installation Procedure
This unit allows a machine without the fax unit installed (“Client-side Machine”) to send and receive faxes via a
machine with the fax unit installed (“Remote Machine”).
Requirements:
• Up to six machines can be registered as the Client-side Machines.
• Machines that have the fax unit installed cannot be used as the Client-side Machine.
• Only one machine can be registered as the Remote Machine.
• Firmware for this unit: “aics” (software number: D3A7759)
• Remote Fax transmissions are possible on a G3 line.
• The remote fax function does not support User Code Authentication. Disable the User Code Authentication
on the Remote machine.
• Use this function to check the contents of a file that is stored in memory and not yet sent. Also, use this
To Next Page
Loading...
Need help?
General