2.Replacement and Adjustment
22
13. When “Ready” appears on the operation panel display, turn OFF the main power, and then disconnect the
FFC from the old FCU board.
14. Disconnect the FFC from the new FCU board.
15. Reassemble the machine.
16. Turn ON the main power. Execute SP6-101 to print the system parameter list.
17. Check the system parameter list to make sure that the data is transferred correctly.
18. Set the correct date and time with the User Tools.
[User Tools] > [Machine Features] > [System Settings] > [Timer Setting] > [Set Date/Time].
To Next Page
Loading...
Need help?
General