Controller Options
133
To address the possible customer needs listed below, the PostScript3 is made available as an option.
• When you want to use device fonts supplied with Adobe PS.
• Since forms and ledgers have been created based on device fonts supplied with Adobe PS, a
changeover to Clone PS requires redesign of these documents.
• From the viewpoint of precise printing operation, it is impossible to accept any differences in output
results in comparison with Adobe PS.
•
• For details of the functions of Adobe PS and Clone PS, refer to Adobe PS vs. Clone PS.
Installation procedure (Adobe PS)
• When installing this option, turn OFF the main power and unplug the power cord from the wall socket.
If installing without turning OFF the main power, an electric shock or a malfunction may occur.
• Clone PS and Adobe PS cannot be run simultaneously. If PostScript3 (Adobe PS) is installed, Clone
PS will be disabled.
• When installing more than one SD card, perform the merge operation (SD Card Appli Move).
1. Remove the SD card slot cover [A] (coin screw x 1).
2. Insert the PS3 SD card in SD card slot 1 [A: Upper Slot].
To Next Page
Loading...
Need help?
General