56 Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019
Chapter 3 Configure Terminal Settings
Adjust the Brightness of
the Display
You can adjust the brightness level of the terminal display in increments from
1…100%.
To adjust the brightness of the display, follow these steps.
1. Press the navigation button on the terminal.
2. On the Settings screen, tap Display.
3. Tap the Brightness field.
The virtual numeric keypad opens.
4. Enter the value for the brightness in increments from 1…100%.
5. Tap O K .
6. To close the window, tap X.
TIP Lower the brightness level to reduce the power that the backlight consumes,
and extend the life of the backlight.
These tags can also be set to control backlight brightness level:
::Local:HMIDevice.Display.BacklightIntensity
::Local:HMIDevice.Display.ScreenSaverIntensity
To Next Page
Loading...
Need help?
General
