Payment Systems
Page 8-12 BASO-2 - 02.08 - V07
8.3. Payment with self-service systems
8.3.1. Token slot and related systems
Chip cards required - None
- MASTER card (see chapter 8.1).
For all the functions described in this chapter, it is assumed that the machine is ready
for routine operation in payment mode.
The coffee machine will accept tokens at the same time as MONEY cards if pro-
grammed to do so by the service engineer.
8.3.1.1. Prepare beverages
1. If the machine is ready in payment mode, the following message is displayed:
2. Insert token into the token slot.
3. Press product key. Product is served.
Several tokens may be inserted. When a product is selected, the number of tokens
set by the service engineer for the selected key is debited from the displayed credit.
It may be necessary to insert several tokens (max. 5) in order to obtain a beverage.
For the token slot to be able to accept tokens the machine must be switched on and
payment mode enabled with the PROGRAM card (see chapter 4.6.1.3).
If too many tokens are inserted, they remain as credit but cannot be reclaimed. No
coins/tokens are returned.
Attention: Credit is lost when the machine is switched off.
8.3.2. NRIG 13 EMP no-change coin slot and related systems (standard type)
Chip cards required - None
- MASTER card (see chapter 8.1)
- PROGRAM card to change prices, enable, disable and for payment mode.
For all the functions described in this chapter, it is assumed that the coffee machine
is ready for routine operation in payment mode. If the coin slot is programmed for to-
kens, it can be fed both coins and tokens.
Each product has a coin price and a token price.
The slot can also be used solely for tokens if disabled for coins.
credit operation
12:00 15.10.2001
token credit 1
select product
To Next Page
Loading...
Need help?
General
