User Instructions
Page 4-12 BASO-2 - 02.04 - V07
4.5. Programming using standard chip cards
The CHEF and SAVE DATA cards are part of the standard delivery package. They
provide a simple means of changing settings or retrieving information from the coffee
machine.
For all the functions described in this chapter, it is assumed that the coffee machine
is ready for routine operation in normal operating mode.
Keep the chip cards in a safe place where only authorized persons have access to
them.
When a chip card is in the card reader, no products can be selected.
4.5.1. CHEF card
The CHEF card enables the principal settings or modifications to be undertaken for
routine operation.
4.5.1.1. Menu
- Read daily counter for coffees and teas per key.
- Reset product counter
- Read monthly counter
- Change quantity of product dispensed
- Change quantity of coffee ground
- Change on/off timer
- Change time
- Change date
- Change PIN code
- Delete the “service wanted” message
At the end of every menu:
Press [
] or [ ] key to reach the next menu or remove CHEF card Î coffee ma-
chine
ready in normal operating mode.
4.5.1.2. Read product counter for coffees and teas per key
1. Insert CHEF card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed:
= Displayed value is the total of all coffee and tea products.
3. Individual product totals can be read successively by pressing the respective product
keys.
= Displayed value is the total of the selected product key.
4. Press
[ ] key to return to message displayed in no. 2.
Press
[ ] or [ ] key to reach next menu,
or remove CHEF card
Î coffee machine ready in normal operating mode.
total prod. counter
quantity #####
total prod. counter
K: xxx T: xxx
To Next Page
Loading...
Need help?
General
