User Instructions
BASO-2 - 02.04 - V07 Page 4-3
4. USER INSTRUCTIONS
4.1. Introduction
This chapter describes the basic functions of the coffee machine. Read
them attentively to ensure easy and problem-free routine operation.
Note:
As a prerequisite for a smooth operation of the milk solution machine, it
must be installed and programmed by an after sales service organiza-
tion, authorized by the manufacturer.
Danger!
The machine must only be operated by qualified personnel!
Danger of scalding and burns!
• Never work underneath the beverage outlet area while the
products are being served. The liquids coming from the ma-
chine are hot! To protect yourself from burns, once you have
used the outlet buttons, keep your hands and other parts of
your body away from the beverage outlet area
• Don’t touch any hot surfaces, such as the heat retaining plate.
Always use the appropriate handles and buttons (danger of
burns)!
• When an outlet button has been pressed, the machine will not
stop after the cup is removed from the beverage outlet area.
The brewing process that has already started (also for selected
products) will continue
until it’s finished.
• The machine does not stop if the coffee pot or cup is removed
from the dispensing area after you have pressed a dispense
button. While coffee is being made, never put fingers into the
brewing unit!
Danger!
Switch off the coffee machine if you accidentally pour liquid
over the cup hotplate (risk of short-circuit)!
+ Inform the after sales service!
Attention!
Never put anything other than roast coffee beans into the coffee
bean container.
Noise emissions!
Noise emission levels can be up to 70 dB (A), particular when you
are heating up beverages.
To Next Page
Loading...
Need help?
General
