Siemens LOGO! 24 User Manual

81
LOGO! Manual
A5E00067781 01
If the state at the Trg input remains 1 at least for the dura-
tion of the parameterized time T, the output is set to 1 after
the time T has elapsed (there is a delay between the input
being switched on and the output coming on).
If the state at the Trg input switches back to 0 before the
time T has elapsed, the time is reset.
The output is reset to 0 if the state at the Trg input is 0.
In the event of a power failure, the elapsed time is reset.
LOGO! Functions

Siemens LOGO! 24 Specifications

General

Dimensions	90 x 72 x 55 mm
Relay Outputs	4
Programming	LOGO! Soft Comfort
Mounting Type	DIN Rail
Protection Class	IP20
Inputs	8 Digital
Outputs	4 Relay
Output Current	10 A per relay output
Operating Temperature	0 ... 55 °C
Display	LCD with backlight