To Next Page

To Previous Page

Configuration / diagnostics using remote mechanisms

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)

SCALANCE X-200

204 Operating Instructions, 12/2011, A5E00349864-19

Group Name

Here, you select the SNMPv3 user group to which the user you are creating will be assigned.

Authentication Algorithm

Here, you select the authentication method that the user will use.

Authentication Password/Password Confirmation

Here, you enter the password with which the user you are creating will log on with the IE

switch for SNMPv3 communication.

Privacy Password/Password Confirmation

Here, you specify the password that the user will use for encryption of SNMPv3

communication.

6.3.5.24 The "Agent Event Config" WBM menu

Agent Event Configuration

On this page, you specify how the IE Switch X-200 reacts to system events. By selecting the

corresponding check boxes, you specify how the IE Switch X-200 reacts to the various

events. The following options are available:

● The IE Switch X-200 sends an e-mail.

● The IE Switch X-200 triggers an SNMP trap.

● The IE Switch X-200IRT saves the relevant event in the event table.

Figure 6-29 "Agent Event Configuration" dialog

Siemens SCALANCE X-200 User Manual

Other manuals for Siemens SCALANCE X-200