Software and commissioning
4.2 Install example image on eMMC
SIMATIC IOT2050
46 Operating Instructions, 03/2024, A5E39456816-AF
Use USB Wifi dongle to connect the IOT2050 to a wireless access point
1. Insert your USB Wifi dongle into the IOT2050 device.
2. Navigate to "Activate a connection" and select the wireless access point that you want to
connect to. And then enter the password.
3. To change the wireless connection, go to the "Edit a connection" page.
4.2.3.5 Installing software on IOT2050
The provide example image includes the apt package manager, with which you can install
software on IOT2050.
To Next Page
Loading...
Need help?
General
