Siemens SIMATIC IOT User Manual

SIMATIC IOT2050
Operating Instructions, 03/2024, A5E39456816-AF
51
Expand device
5
5.1 Insert Micro SD card/Nano SIM card
Applicable Configuration
This operation is only applicable for the following configurations:
• IOT2050 Basic: 6ES7647-0BA00-0YA2
• IOT2050 Advance: 6ES7647-0BA00-1YA2
• IOT2050 M.2: 6ES7647-0BB00-1YA2
• IOT2050 SM: 6ES7647-0CA00-1AA2
Requirement
• The device is disconnected from the power supply.
• Micro SD card or Nano SIM card that is suitable for industrial use.
Installation
NOTICE
Inserting a memory card
If you are using the Micro SD card/Nano SIM card in a device installed in a system, you must
observe the safety regulations for work on electrical systems.
Carefully insert the Micro SD card/Nano SIM card into the card holder without applying
excess force.
1.
Open the card cover on the bottom.
2.
Push the Micro SD card/Nano SIM card
correctly into the supporting frame. The
contacts of the Micro SD card/Nano SIM
card must point in the direction of the
motherboard.
3.
Push the card cover back.

Siemens SIMATIC IOT Specifications

General

Brand	Siemens
Model	SIMATIC IOT
Category	Industrial PC
Language	English