Operating recipes
10.6 Recipe data record administration
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
10-17
!
e-est recipe data record
1. Select the recipe on the HMI device in which you want to delete an existing recipe data
record.
2. Select the recipe data record that you want to delete on the HMI device.
3. On the recipe view, select "Delete data record", or use the relevant button on the HMI
device that is configured with this function.
Result
The recipe data record is deleted from the data medium of the HMI device.
10.6.2 Synchronizing a recipe data record
Introduction
In Runtime, differences between the indicated values and the actual values of the recipe
tags may arise as a result of data input in recipe views or modification of recipe tags.
Depending on the configuration, you can synchronize the values displayed in the recipe view
with the recipe tags and values of the PLC. This synchronization is performed for each one
of the recipe tags contained in the recipe data record.
Requirements
A recipe data record is displayed in the recipe view. The value of recipe tags can be
changed by teach-ins.
Procedure
1. Use the "Synchronization with controller" button in the recipe view or the corresponding
button configured with this function.
Result
• The system always updates the current value of the recipe view with the up-to-date
recipe tag value.
• When the value shown in the recipe view is more recent than the current recipe tag value,
the system writes this value to the recipe tag.
To Next Page
Loading...
Need help?
General
