Siemens SIMATIC TP 270 User Manual

Operating system and configuration
6.2 Windows CE Control Panel
TP 270, OP 270, MP 270B (WinCC flexible)
6-2 Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
Protect loader with password
It is possible to protect the loader from unauthorized access by assigning a password.
If the password is not entered, only the "Transfer" and "Start" buttons are available. This
prevents incorrect operation and increases system or machine security.
Notice
If the password for the loader has been forgotten, it is only possible to access the Control
Panel again after updating the operating system.
All the data on the HMI device are overwritten when to operating system is updated.
See also
Open Control Panel (Page 6-2)
6.2 Windows CE Control Panel
6.2.1 Open Control Panel
Windows CE Control Panel
The Windows CE Control Panel can be used to modify the following system settings:
• Date/time
• Network
• Device properties, e.g. brightness and calibration of touchscreens
• Regional settings
• Screensaver
• Screen keyboard
• Volume (touch acknowledgement)
• Printer
• Backup/Restore
• Transfer
• UPS (optional)

Siemens SIMATIC TP 270 Specifications

General

Brand	Siemens
Model	SIMATIC TP 270
Category	Touch Panel
Language	English