Siemens SIMOTICS M-1PH8 User Manual

WARNING
Motor-specific sensor module
The Sensor Module contains motor-specific and sensor-specific data and an electronic
nameplate.
If you operate a different Sensor Module on the motor, this can result in serious injury or
death, or cause considerable material damage.
Only operate the sensor module on the original motor. Do not install the sensor module on
other motors. Do not replace the sensor module with a sensor module from a different motor.
9.3.6 Touch up any damaged paintwork
If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center (Page 131) before you repair any paint damage. They will provide
you with more information about the correct paint system and methods of repairing paint
damage.
Maintenance
9.3 Repair
SIMOTICS M-1PH8 1PH818., 1PH822.
118 Operating Instructions 07/2016

Siemens SIMOTICS M-1PH8 Specifications

General

Brand	Siemens
Model	SIMOTICS M-1PH8
Category	Engine
Language	English