Spare parts
10
10.1 Ordering data
When ordering spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example:
Spare part Spare parts kit, drive-end bearing (Part 3.00)
Machine type 1PH81841JD202FA1
Serial number N-W91246206010001
The machine type and the serial number are indicated on the rating plate and in the technical
data, and are also embossed on the drive end of the shaft.
Note
Bar code on rating plate
You can also read the machine type and serial number from the bar code on the rating plate.
Note
The graphics in this chapter are schematic representations of the basic versions. They are
used for spare parts definitions. The supplied version may differ in details from these
representations.
10.2 Spare parts kits
The spare parts are bundled with the necessary wearing parts in a logical way so as to create
spare parts kits.
The following spare parts kits are available for you to order:
3.00 Spare parts kit, non-drive-end bearing (complete)
4.00 Spare parts kit, drive-end bearing (complete)
32.00 Spare parts kit, external fan (only force-ventilated motors)
55.00 Spare parts kit, relevant version of speed encoder
Additional spare parts are available on request.
See also
Service and Support (Page 131)
SIMOTICS M-1PH8 1PH818., 1PH822.
Operating Instructions 07/2016 119
To Next Page
Loading...
Need help?
General