11.3 Removing device components and old devices
If you correctly dispose of the materials, none of the materials pollutes the environment. When
disposing or reusing, comply with the local laws and regulations.
WARNING
Improper disassembly
In the event of an improper procedure during disassembly, material can slip, tilt, and fall down.
This can result in death, serious injury or material damage.
● Only specialist personnel may disassemble and dispose of device components and old
devices using appropriate protective clothing.
● Shut down the device before disassembling. Ground the device
● With old devices, also follow the instructions in the section "Transport."
For the following components, pay special attention when disposing or reusing:
● Batteries
● Capacitors
● PCBs
● Electronic components
11.4 Bypass disposal
The bypass is equipped with an initiator with pyrotechnic activation. The bypass may only be
dismantled, recycled or disposed of if the initiator has been activated.
Observe applicable country-specific regulations when transporting, storing and disposing of
the bypass.
Activating the initiator
CAUTION
Risk of injury when the initiator is activated pyrotechnically
If the initiator has been activated improperly or is held in the held when activated, physical
injury such as crushing may occur.
● The initiator must only be activated by a qualified and trained specialist. Place the bypass
in an open space for activation.
Disposal
11.4 Bypass disposal
SINAMICS PERFECT HARMONY GH150 6SL38253AE412AA1-Z
144 Operating Instructions Rev.201910281231 EXAMPLE
To Next Page
Loading...
Need help?
General