You can set the drive mode, such as continuous or self-timer shooting.
1. MENU → (Camera Settings) → [Drive Mode] → desired setting.
You can also set the drive mode by pressing / (Drive Mode) button of the
control wheel.
Menu item details
Single Shooting:
Shoots one still image. Normal shooting mode.
Cont. Shooting:
Shoots images continuously while you press and hold down the shutter button.
Self-timer:
Shoots an image using the self-timer after a designated number of seconds have elapsed
since the shutter button was pressed.
Self-timer(Cont):
Shoots a designated number of images using the self-timer after a designated number of
seconds have elapsed since the shutter button was pressed.
Cont. Bracket:
Shoots images while holding the shutter button down, each with different degrees of
brightness.
Single Bracket:
Shoots a specified number of images, one by one, each with a different degree of
brightness.
WB bracket:
Shoots a total of three images, each with different color tones according to the selected
settings for white balance, color temperature and color filter.
DRO Bracket:
Shoots a total of three images, each at a different degree of D-Range Optimizer.
Note
When the shooting mode is set to [Scene Selection] and [Sports Action] is selected,
[Single Shooting] cannot be performed.
[104] How to Use
Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Cont. Shooting
To Next Page
Loading...
Need help?
General
