For [Intelligent Auto] and [Superior Auto] mode, most of the functions are set
automatically, and you cannot adjust the settings on your own.
[36] How to Use
Shooting Selecting a shooting mode
Program Auto
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and
the aperture value).
You can set shooting functions such as [ISO].
1. Set the mode dial to P (Program Auto).
2. Set the shooting functions to your desired settings.
3. Adjust the focus and shoot the subject.
Program Shift
You can change the shutter speed and aperture (F-value) combination by rotating the
control dial, without changing the appropriate exposure that is set by this product. This
function is available when you do not use the flash.
“P” on the screen changes to “P*” when you turn the control dial.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off
the camera.
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than “P” or turn off the power to cancel the setting
you made.
When the brightness changes, the aperture (F-value) and shutter speed also change
while maintaining the shift amount.
[37] How to Use
Shooting Selecting a shooting mode
Sweep Panorama
Allows you to create a single panoramic image from multiple images shot while panning the
camera.
To Next Page
Loading...
Need help?
General
