number from [ISO AUTO] or ISO 100 – 51200.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 100 – ISO 51200:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Note
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[Sweep Panorama]
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images,
shooting movies, or using HFR.
When shooting movies, ISO values between ISO 100 and ISO 25600 are available. If the
ISO value is set to larger value than ISO 25600, the setting is automatically switched to
ISO 25600. When you finished the movie recording, the ISO value returns to the original
setting.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay
processing of images.
Hint
You can change the automatically set ISO sensitivity range for the [ISO AUTO] mode.
Select [ISO AUTO] and press the right side of the control wheel, and set the desired
values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO
Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO]
mode under [Multi Frame NR].
[114] How to Use
Using shooting functions Selecting the ISO sensitivity
ISO AUTO Min. SS
If you select [ISO AUTO] or [ISO AUTO] under [Multi Frame NR] when the shooting mode is
P (Program Auto) or A (Aperture Priority), you can set the shutter speed at which the ISO
sensitivity starts changing.
This function is effective for shooting moving subjects. You can minimize subject blurring
while also preventing camera shake.
1. MENU→ (Camera Settings)→[ISO AUTO Min. SS]→desired setting.
To Next Page
Loading...
Need help?
General
