The image on the monitor or viewfinder may have an aperture value different from that of the
actual image to be shot. Since the blurring of a subject changes if the aperture is changed,
the blurriness of the actual picture will differ from the image you were viewing prior to
shooting. While pressing down the key to which [Shot. Result Preview] is assigned, you can
check the image preview with the DRO, shutter speed, aperture and ISO sensitivity settings
applied. Check the shooting result preview before shooting.
1. MENU → (Custom Settings) → [Custom Key(Shoot.)] → set the [Shot. Result
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Shot. Result Preview] was assigned.
Hint
The DRO settings, shutter speed, aperture and ISO sensitivity settings you have set are
reflected on the image for [Shot. Result Preview], but some effects cannot be previewed
depending on the shooting settings. Even in that case, the settings you have selected will
be applied to the images you shoot.
[178] How to Use
Viewing Viewing still images
Playing back images
Plays back the recorded images.
1. Press the (Playback) button to switch to the playback mode.
2. Select the image with the control wheel.
Hint
The product creates an image database file on a memory card to record and play back
images. An image that is not registered in the image database file may not be played
back correctly. To play back images shot using other devices, register those images to
the image database file using MENU → [Setup] → [Recover Image DB].
To Next Page
Loading...
Need help?
General
