Sony A6300 User Manual

handed rotation.
Note
This function is available only with a power zoom lens whose operation direction is
variable.
[51] How to Use
Using shooting functions Using the flash
Using flash
In dark environments, use the flash to light up the subject while shooting and to prevent
camera-shake. When shooting against the sun, use the flash to lighten the image of the
backlit subject.
1. Press the (Flash pop-up) button to pop up the flash.
2. Press the shutter button fully down.
When you do not use the flash
When not using the flash, press it back into the camera body.
Note
If you fire the flash before the flash unit pops up entirely, it may cause malfunction.
You cannot use the flash when recording movies.
While charging the flash, flashes. After charging is completed, the flashing icon will
light up.
When an external flash (sold separately) is attached to the Multi Interface Shoe, the state
of the external flash has priority over the setting of the product. You cannot use the
product’s internal flash.
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe,
turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and screw tightly.

Sony A6300 Specifications

General

ISO Range	100 - 25600 (expandable to 51200)
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, NFC
Battery	NP-FW50
Shutter Speed	1/4000 to 30 sec
Built-in Flash	Yes
Dimensions	120.0 x 66.9 x 48.8 mm
Sensor	APS-C Exmor CMOS Sensor
Autofocus Points	425 phase-detection points
Video Resolution	4K UHD (3840 x 2160)
Viewfinder	2.36 million-dot XGA OLED Tru-Finder EVF
Screen	3.0-inch 921k-dot tilting LCD
Battery Life	350 shots (CIPA)
Weight	404g (body only)