[134] How to Use Using shooting functions Recording movies
MOVIE Button
Sets whether or not to activate the MOVIE button.
1. MENU → (Custom Settings) → [MOVIE Button] → desired setting.
Menu item details
Always:
Starts movie recording when you press the MOVIE button in any mode.
Movie Mode Only:
Starts movie recording when you press the MOVIE button only if the shooting mode is set to
[Movie/HFR] mode.
[135] How to Use Using shooting functions Recording movies
Picture Profile
Allows you to change the settings for the color, gradation, etc.
For details on “Picture Profile,” refer to http://helpguide.sony.net/di/pp/v1/en/index.html.
Customizing the picture profile
You can customize the picture quality by adjusting picture profile items such as [Gamma]
and [Detail]. When setting these parameters, connect the camera to a TV or monitor, and
adjust them while observing the picture on the screen.
1. MENU → (Camera Settings) → [Picture Profile] → the profile you want to change.
2. Move to the item index screen by pressing the right side of the control wheel.
3. Select the item to change using the up/down sides of the control wheel.
4. Select the desired value using the up/down sides of the control wheel and press in
the center.
Using the preset of the picture profile
The default settings [PP1] through [PP9] for movies have been set in advance in the camera
based on various shooting conditions.
To Next Page
Loading...
Need help?
General
