Sony A6300 User Manual

[136] How to Use Using shooting functions Customizing the shooting functions for
convenient use
Memory
Allows you to register up to 2 often-used modes or product settings to the product and up to
4 (M1 through M4) to the memory card. You can recall the settings using just the mode dial.
1. Set the product to the setting you want to register.
2. MENU → (Camera Settings) → [Memory] → desired number.
Items that can be registered
Shooting mode
Aperture (F number)
Shutter speed
Camera Settings
To recall registered settings
Select the memory number from “1” or “2” on the mode dial.
Then press the right/left side of the control wheel to select the desired memory number.
M1 through M4 can be selected only when a memory card is inserted into the product.
To change registered settings
Change the setting to the desired one and re-register the setting to the same mode number.
Note
Program Shift cannot be registered.
[137] How to Use
Using shooting functions Customizing the shooting functions for
convenient use
Function Menu Set.
You can assign the functions to be called up when you press the Fn (Function) button.
1. MENU → (Custom Settings) → [Function Menu Set.] → set a function to the
desired location.

Sony A6300 Specifications

General

ISO Range	100 - 25600 (expandable to 51200)
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, NFC
Battery	NP-FW50
Shutter Speed	1/4000 to 30 sec
Built-in Flash	Yes
Dimensions	120.0 x 66.9 x 48.8 mm
Sensor	APS-C Exmor CMOS Sensor
Autofocus Points	425 phase-detection points
Video Resolution	4K UHD (3840 x 2160)
Viewfinder	2.36 million-dot XGA OLED Tru-Finder EVF
Screen	3.0-inch 921k-dot tilting LCD
Battery Life	350 shots (CIPA)
Weight	404g (body only)