124
Copy and Swap
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
Wipe copy and wipe swap
You can copy and swap the wipe settings among the banks
as follows.
Wipe copy and wipe swap in the
independent key transition control block
You can copy and swap the wipe settings among the
following keyers.
DME wipe copy and DME wipe swap
You can copy and swap the DME wipe settings among the
banks as follows.
DME wipe copy and DME wipe swap in the
independent key transition control block
You can copy and swap the DME wipe settings among the
following keyers.
Matte data copy and swap
You can copy or swap the matte data among the following
color generators.
a) Only among keyers that support resizer and key edge.
Color data copy and swap
You can copy or swap the color data among the following
color generators.
a) Only among keyers that support resizer and key edge.
Copying format converter data
You can copy data between format converter inputs.
Similarly, you can copy format converter data between
outputs.
The copy source and destination data must be in the same
signal format.
Copy and Swap Operations
Copy and Swap Using Menus
Copy and swap operations are performed using the Copy/
Swap menu.
Select the following targets for operation in the Copy/
Swap >Copy/Swap menu. (For format converter
operations, use the Copy/Swap >Copy menu.)
This section describes copy and swap operations for wipe
data as an example.
• M/E: Copying and swapping M/E data
• Key: Copying and swapping key data
• Wipe: Copying and swapping wipe data
• DME Wipe: Copying and swapping DME wipe data
• Matte: Copying and swapping matte data
• Color: Copying and swapping color data
• Format Converter: Copying format converter data
For an overview of copy and swap operations,
1 “Overview of Copy and Swap” (p. 123).
Copy and swap menu operations
To copy or swap wipe data, use the following procedure.
1
Open the Copy/Swap >Copy/Swap >Wipe menu
(3113).
Target bank Target data
M/E -1
PGM/PST
Wipe settings.
However, it is not possible to carry out
copy or swap involving independent key
transition wipe settings.
Target bank Target keyer Target data
M/E -1 Keys 1 to 4 Wipe settings in the
independent key
transition control
block.
PGM/PST Downstream
keys 1 to 4
Target bank Target data
M/E -1
PGM/PST
DME wipe settings.
However, it is not possible to carry out
copy or swap involving independent key
transition DME wipe settings.
Target bank Target keyer Target data
M/E -1 Keys 1 to 2 DME wipe settings in
the independent key
transition control
block.
PGM/PST Downstream
keys 1 to 2
Target bank Target keyer and data
M/E-1
PGM/PST
Keys 1 to 4 and
downstream
keys 1 to 4
in each bank
• Matte data for key fill
• Matte data for key
edge fill
a)
Matte data for wipe border edge
Color
background
• Matte data for color background 1
• Matte data for color background 2
Target bank Target keyer and data
M/E -1
PGM/PST
Keys 1 to 4 and
downstream
keys 1 to 4
in each block
• Colors 1 and 2 for
key fill
• Colors 1 and 2 for
key edge fill
a)
• “Zabton” color data
a)
Colors 1 and 2 for wipe border
Color data for preset color mix
Color
background
• Colors 1 and 2 for color background 1
• Colors 1 and 2 for color background 2
Notes
To Next Page
Loading...
Need help?
General