EasyManuals Logo
Home>Sony>Switch>MVS-3000 System

Sony MVS-3000 System User Manual

Sony MVS-3000 System
315 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
51
Executing a Transition
Chapter 3 Signal Selection and Transitions
In the multi-program mode, you can use a preset color
mix only when selecting the background for the next
transition.
One-stroke mode and one-time mode
You can make a setting such that a preset color mix is
carried out in a single transition. This is called “one-
stroke mode.”
When the bus fixed mode is selected in the Setup menu,
a preset color mix is always carried out in the one-stroke
mode.
You can also make a setting such that when a preset
color mix is completed, the next transition switches to
the previous transition type automatically. This is called
“one-time mode.”
When only the background is changed
When a key is inserted
By means of a Setup menu setting, it is possible to preserve
the key state while carrying out the color matte mix.
When a key is selected for the next transition
while a key is inserted
Setting the color matte
1
When operating from the M/E-1 bank, for example,
open the M/E-1 >Misc >Transition menu (1171).
2
Select [Preset Color Mix] in the <Transition Type>
group.
3
In the <Preset Color Mix Fill> group, select one of the
following.
Flat Color: Monochrome color matte
Utility 1 Bus: Signal selected on the utility bus
4
When “Flat Color” is selected, adjust the color matte.
Executing a Transition
There are two modes of executing a transition: an auto
transition by button operation or a manual transition using
the fader lever.
It is also possible to combine both methods, taking control
with the fader lever of an auto transition which has partly
completed, or complete a transition started with the fader
lever as an auto transition.
By combining common transitions with independent key
transitions, different transition types can be applied to the
background and keys, for example allowing a key wipe
combined with a background dissolve.
Current video New videoColor matte
Key
Key fades in
Key fades out
When no key is selected When a key is
selected as the
next transition
No. Parameter Adjustment
2 Luminance Luminance
3 Saturation Saturation
4Hue Hue
Key
Key state
preserved
Key fades out

Table of Contents

Other manuals for Sony MVS-3000 System

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MVS-3000 System and is the answer not in the manual?

Sony MVS-3000 System Specifications

General IconGeneral
BrandSony
ModelMVS-3000 System
CategorySwitch
LanguageEnglish

Related product manuals