281
Menus of Disabled Operations and Settings
Appendix
Diagnostic Menu
Menus of Disabled Operations and Settings
The following menus display functions and items that are
not supported by the MVS-3000 system. These are
disabled, even if the item is selected or a value specified,
and do not affect device operation.
VF3: Switcher HF7: Device Interface (7337) No
Remote Assign (7337.1) No
GPI Input (7337.2) No
H/L Set (7337.3) No
GPI Output (7337.4) No
AUX Control (7337.5) No
DME SDI I/F (7337.7) No
Editor I/F (7337.8) No
VF6: Router/Tally HF1: Router (7361) No
External Box Assign (7361.1) No
HF2: Group Tally (7362) No
HF3: Wiring (7363) No
New (7363.1) No
Modify (7363.2) No
HF4: Tally Enable (7364) No
New (7364.1) No
Modify (7364.2) No
HF5: Tally Copy (7365) No
New (7365.1) No
Modify (7365.2) No
HF6: Parallel Tally (7366) No
Set (7366.1) No
HF7: Serial Tally (7367) No
Source Assign (7367.1) No
Menu (Page No.) Default Recall
VF1: Error Info HF1: Error Status (7411) No
HF2: Error Log (7412) No
VF3: System Info HF1: LAN Status (7431) No
Menu (Page No.) Default Recall
Menu Disabled operation/setting
Number Path
1115 M/E-1 >Key1 >Processed Key
a)
[DME1], [DME2], [Override] settings
1115.1 M/E-1 >Key1 >Processed Key
>Monitor
a)
All menu operations
To Next Page
Loading...
Need help?
General