147
Overview of Keyframes
Chapter 11 Keyframes
Changes in the effect duration caused by
deleting a keyframe
• When the effect is stopped on a keyframe, a delete
operation deletes the keyframe, and reduces the effect
duration by the duration of the deleted keyframe.
• When the effect is stopped between two keyframes, a
delete operation deletes the preceding keyframe, and
reduces the effect duration by the duration of the deleted
keyframe.
In constant duration mode (1 p. 146), the duration of the
keyframe before the deleted keyframe is increased by the
duration of the deleted keyframe. Thus the effect duration
does not change.
Keyframe deletion position and the change in effect duration
Delay setting
You can set the delay from the time of executing an
operation to run the effect, and the effect actually starting
(that is, the delay until the first keyframe). You make this
setting in the Flexi Pad.
Note that changing the delay does not alter the duration of
the effect.
Paths
The term “path” refers to the specification of how
interpolation is carried out from one keyframe to the next.
Images are interpolated from an edit point to the next one
according to the path setting.
For details about the path setting procedure, 1 “Path
Setting” (p. 159).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 and P/P menus
User1 to User8 menus
The items that can be adjusted depend on the settings in the
Setup menu.
For details, 1 “Setting User Regions” (p. 241).
Notes
Deletion position Change in effect duration
Deletion of the first
keyframe
Deletion of an
intermediate
keyframe
Deletion between
two keyframes
Deletion of the last
keyframe
Item Paths that can be set
M/E-1, P/P All For each M/E and PGM/PST, path
settings for the following items are
made simultaneously.
Key1 to Key4 Overall path settings for items
relating to keys 1 to 4 are made
simultaneously.
Key1 All to
Key4 All
Source Key source path for keys 1 to 4
Fill Key fill path for keys 1 to 4
Proc Proc path for keys 1 to 4
Trans Transition path for keys 1 to 4
Bkgd/Util Overall path settings for items
relating to the background and
utility buses are made
simultaneously.
Bkgd/Util All
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility
Wipe/DME Wipe Overall path settings for items
relating to wipes and DME wipes
are made simultaneously.
Wipe/DME
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
Trans - Transition path for each M/E and
PGM/PST bank
Item Paths that can be set
User1 All to User8
All
Overall path settings for the
following items for each “User” are
made simultaneously.
FM Still Store Overall path settings for frame
memory freeze image output are
made simultaneously.
FM Still
Store All
FM Still
Store 1 to 8
Paths for frame memory freeze
image outputs 1 to 8
Aux Overall path settings for AUX buses
are made simultaneously.
Aux All
Aux 1 to 24 Paths for Aux 1 to 24
To Next Page
Loading...
Need help?
General