Sony STR-DN1070 User Manual

Note
The above explanations are intended to serve as examples.
Depending on the model of your connected device, some functions explained in this section may not
work with the supplied remote control.
[7] Parts and Controls Remote control
Remote control (lower section)
Use the supplied remote control to operate this receiver.
(power)
Turns the receiver on or sets it to the standby mode.
Saving power in standby mode
Save power by setting up the receiver as follows:
Set [Control for HDMI] to [Off] in the [HDMI Settings] menu.
Set [Remote Start] to [Off] in the [Network Settings] menu.
Set [Bluetooth Standby] to [Off] in the [Bluetooth Settings] menu.
Set [Quick Start/Network Standby] (*) to [Off] in the [System Settings] menu.
Set [Zone2 Power], [Zone3 Power] or [HDMI Zone Power] to [Off] in the [Zone Controls]
menu.
1.
Input buttons
Select the input channel connected to the device you want to use.
When you press any of the input buttons, the receiver turns on.
2.
2CH/MULTI, MOVIE, MUSIC, FRONT SURROUND
Select a sound field.
3.
DSD NATIVE
Activates the DSD Native function.
You can turn on or off this function only when playback on the source device is stopped.
4.
RX/TX
Switches the BLUETOOTH mode of the receiver. (Disabled while the BLUETOOTH function
or Screen mirroring function is activated.)
In BLUETOOTH RX mode, the receiver receives and outputs audio from the remote device.
In BLUETOOTH TX mode, the receiver sends audio to the remote device.
5.
HDMI OUT
Switches the output for two monitors connected to the HDMI OUT A (TV) and HDMI OUT
B/HDMI ZONE jacks. Output is toggled between [HDMI A], [HDMI B], [HDMI A+B] and
[HDMI OFF] each time the button is pressed. Select [HDMI OFF] to turn off the output for
HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE jacks.
6.
WATCH, LISTEN
Selects [Watch] or [Listen] on the home menu directly. When pressing these buttons on the
Watch or Listen screen, you can move the focus to select the desired input.
7.
CUSTOM PRESET (1, 2)
Saves and recalls various settings for the receiver. Press to select the custom preset
setting(s). Press and hold to save the current settings to a preset.
8.
For USA, Canadian and Oceanian models only.
*

Sony STR-DN1070 Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	6
Audio (L/R) in	4
Digital audio coaxial in	1
Number of HDMI outputs	2
Connectivity technology	Wired & Wireless
Speakers connectivity type	Banana connector
Ethernet LAN	Yes
Bluetooth version	3.0+HS
Supported radio bands	AM, FM
Preset stations quantity	30
Optical drive included	No
Display	-
Product color	Black
Audio decoders	DTS, DTS 96/24, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Dual Mono, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby TrueHD
Power consumption (standby)	0.4 W
Audio formats supported	AAC, AC3, AIFF, ALAC, FLAC, HE-AAC, LPCM, M4A, MP3, WAV, WMA

Weight and Dimensions

Depth	329.438 mm
Width	430.022 mm
Height	171.958 mm
Weight	10500.663 g