For details, see “Changing the name for each input (Name).”
The image quality depends on the connecting jack. We recommend that you connect your devices
via an HDMI connection if they have HDMI jacks.
[30] Preparation 4. Connecting audio-visual devices and the antennas (aerials)
Connecting a USB device
Connect a USB device as illustrated below.
USB device
Note
iPhone/iPad/iPod playback via (USB) port is not possible.
[31] Preparation 4. Connecting audio-visual devices and the antennas (aerials)
Connecting the antenna (aerial)
Connect the supplied FM wire antenna (aerial) to the receiver as illustrated below.
Before connecting antenna (aerial), be sure to disconnect the AC power cord (mains lead).
FM wire antenna (aerial) (supplied)
Note
Be sure to fully extend the FM wire antenna (aerial).
After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
[32] Preparation 4. Connecting audio-visual devices and the antennas (aerials)
Connecting another amplifier in Zone 2
You can enjoy sound from a device connected to the receiver in a zone other than the main
zone. For example, you can watch a DVD in the main zone and listen to a CD in Zone 2.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
