Sony STR-DN1070 - Access Control

[91] Using Network Features Setting whether to control this receiver from a device on the
home network
Enabling automatic access from a newly detected
controller device (Auto Home Network Access
Permission)
You can set whether or not the receiver allows automatic access from a newly detected
controller device on the home network.
[92] Using Network Features
Setting whether to control this receiver from a device on the
home network
Deleting devices from the device list in Home Network
Access Control
Select [Home Network Access Control].
A list of registered controllers appears (up to 40 devices).
2
Select the controller you want to set and press
.
3
Select the setting you want.
Allow: Permits access from the controller.
Block: Blocks access from the controller.
4
Select [Setup] - [Network Settings] from the home menu.
1
Select [Auto Home Network Access Permission].
2
Select [On] or [Off].
3
Select [Setup] - [Network Settings] from the home menu.
1
Select [Home Network Access Control].
2
Select the device you want to delete and press OPTIONS.
3
Select [Remove] from the options menu.
4
Select [OK].
The selected device is deleted from the device list.
5