[256] Troubleshooting iPhone/iPad/iPod
The sound is distorted.
Press - on the remote control repeatedly. You can also use MASTER VOLUME on the
receiver.
[257] Troubleshooting USB devices
Are you using a compatible USB device?
If you connect an incompatible USB device, the following problems may occur.
The USB device is not recognized.
File or folder names are not displayed on this receiver.
Playback is not possible.
The sound skips.
There is noise.
Distorted sound is output.
[258] Troubleshooting
USB devices
There is noise, skipping, or distorted sound.
Turn off the receiver, reconnect the USB device, and then turn on the receiver.
The music data itself contains noise, or the sound is distorted.
[259] Troubleshooting
USB devices
A USB device is not recognized.
Turn off the receiver, then disconnect the USB device. Turn on the receiver again and
reconnect the USB device.
Connect a compatible USB device.
The USB device does not work properly. Refer to the section on how to deal with this
problem in the operating instructions of the USB device.
[260] Troubleshooting
USB devices
Playback does not start.
Turn off the receiver, reconnect the USB device, and then turn on the receiver.
Connect a compatible USB device.
Select [USB (Connected)] and select a folder/track, then press to start playback.
[261] Troubleshooting USB devices
A USB device cannot be connected to the USB port.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
