The FM stereo reception is poor.
Perform the following procedure to set the FM station receiving mode to the monaural mode.
Note
You can set FM mode in the options menu if the frequency indication is selected in step 3.
[253] Troubleshooting Tuner
You cannot tune to radio stations.
Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) if
necessary.
The signal of the stations is too weak with automatic tuning. Use direct tuning.
No stations have been preset or the preset stations have been cleared (when tuning by
scanning preset stations is used). Preset the stations.
Press DISPLAY MODE on the receiver repeatedly so that the frequency appears on the
display panel.
[254] Troubleshooting
Tuner
RDS does not work (for European and Oceanian
models only).
Make sure that you are tuned to an FM RDS station.
Select a stronger FM station.
The station you tuned to is not transmitting the RDS signal or the signal is weak.
[255] Troubleshooting
Tuner
The RDS information that you want does not appear
(for European and Oceanian models only).
The service may be temporarily out of order. Contact the radio station and find out whether
they actually provide the service in question.
Select [Listen] - [FM TUNER] from the home menu.
1
Select a station on the FM band.
2
Press OPTIONS.
3
Select [FM Mode] from the menu.
4
Select [Monaural].
5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
