Note
Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your
speakers the next time you turn on the receiver.
Hint
You can turn INPUT SELECTOR on the receiver or press the input buttons on the remote control to
select the device you want.
You can adjust the volume differently using the MASTER VOLUME knob on the receiver or the
+/– buttons on the remote control.
To turn the volume up or down quickly
Turn the knob quickly.
Press and hold one of the buttons.
To make fine adjustments
Turn the knob slowly.
Press one of the buttons and release it immediately.
[51] Enjoying Video and Sound Playing AV devices
Enjoying sound of an Audio Return Channel (ARC)
compatible TV
If the receiver is connected to a TV’s HDMI input jack compatible with Audio Return Channel
(ARC), you can listen to TV sound from the speakers connected to the receiver without
connecting an optical digital cable or an audio cable.
Set the receiver by the following procedure to output the sound of the TV from the speakers
connected to the receiver.
Select [Watch] or [Listen] from the home menu.
The menu item list appears on the TV screen.
3
Select the device you want.
4
Turn on the device and start playback.
5
Press
+/– to adjust the volume.
You can also use MASTER VOLUME on the receiver.
6
Press 2CH/MULTI, MOVIE, MUSIC or FRONT SURROUND to enjoy the surround
sound.
You can also use 2CH/MULTI, MOVIE or MUSIC on the receiver.
7
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Control for HDMI].
2
Select [On].
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
