5
2.2.1 General Safety Rules
Touching the terminals or contactors connected to the grid may lead to electric
shock!
• Do not touch the terminals or conductors connected to the grid.
• Respect all safety instructions on the grid connection.
Lethal voltages are present inside the device!
• Pay attention to and follow the warning signs on the device.
• Respect all safety instructions in this manual and other pertinent documents.
Electric shock or fire may occur due to device damage or system fault.
• Visually inspect the inverter for device damages or other hazards.
• Check if the external devices and circuit connections are safe.
• Only operate the device when it is safe to do so.
All installations and operations on the inverter must be in full accordance with the
national and local regulations and standards.
2.2.2 Manual Storage
Product manuals are an indispensable part of the product. Important information about the
transport, installation, maintenance, and troubleshooting of the inverter is included in this
manual. All the descriptions in this manual, especially those safety-related items, must be
complied with. Read all the instructions thoroughly prior to performing any operation work on
the inverter.
• Transport, install, maintain, and service the inverter strictly following the descriptions in
this manual. Device damage, personal injury, or property loss be caused if otherwise.
• This manual and relevant documents should be available for relevant persons at all
times.
System Manual 2 Safety Instructions
To Next Page
Loading...
