47
7
Commissioning
7.1 Safety Instructions
High voltage! Electric shock!
• Wear proper protection equipment before all operations on the device.
• Do not touch the live terminals or conductors.
• Respect all safety instructions attached on the device and described in this
manual.
• Respect all safety instructions prescribed by the manufacturer of devices
connected to the inverter.
Grid-connection of the inverter can be performed only after receiving approval
from the local utility grid company and by qualified personnel.
When the inverter is operating, make sure there are no flammable materials within
at least 5m around the installation site.
Local/national standards about the min. electric clearance around the inverter
should be respected.
Make sure the installation is correct and no spare parts or tools are left inside the
device.
Close the doors of the inverter and the internal devices if the commissioning
process is stopped.
7.2 Requirements of Commissioning
Before commissioning, installation of the DC cabinet and AC cabinet inside the inverter
should be checked thoroughly.
To Next Page
Loading...
Need help?
General