CHASSIS 9-63
FRONT BRAKE
CONSTRUCTION
"

* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent.
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc. and will damage then severly.
1
Diaphragm
2
Dust boot
3
Piston/cup set
4
Brake hose
5
Boot
6
Caliper
7
Brake pad spring
8
Brake pad
9
Piston seal
0
Dust seal
A
Piston
B
Caliper holder
C
Insulator
D
Shim
A
Front brake master cylinder mounting bolt
B
Brake hose union bolt
C
Air bleeder valve
D
Brake caliper mounting bolt
E
Pad mounting pin
F
Plug
G
Cliper holder pin
ITEM N·m kgf-m lb-ft
A
10 1.0 7.0
B
23 2.3 16.5
C
7.5 0.75 5.5
D
26 2.6 19.0
E
18 1.8 13.0
F
2.5 0.25 1.8
G
13 1.3 9.5
@