Suzuki AN650 2002 User Manual

9-64 CHASSIS
BRAKE PAD REPLACEMENT
• Remove the plug
1.
• Remove the pad mounting pin
2.
• Remove the pads
3.
• Inspect the pad mounting pin for wear. If excessive wear is
found, replace the mounting pin with a new one.
• Assemble the new brake pad
4, insulator 5 and shim 6.

NOTE:
The pad fitted shim and insulator must be installed at piston
side.
• Install the brake pads.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.

Suzuki AN650 2002 Specifications

General

Brand	Suzuki
Model	AN650 2002
Category	Motorcycle
Language	English