2-28 PERIODIC MAINTENANCE
CHASSIS BOLT AND NUT
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-28 for the loca-
tions of the following nuts and bolts on the motorcycle.)
Tighten initially at 1 000 km (600 miles, 1 month) and
every 6 000 km (4 000 miles, 6 months) thereafter.
ITEM N·m kgf-m lb-ft
1 Steering stem head nut 65 6.5 47.0
2 Front fork upper clamp bolt 23 2.3 16.5
3 Front fork lower clamp bolt 23 2.3 16.5
4 Front axle 65 6.5 47.0
5 Front axle pinch bolt 23 2.3 16.5
6 Handlebar clamp bolt 23 2.3 16.5
7 Front brake master cylinder mounting bolt 10 1.0 7.0
8 Front brake caliper mounting bolt 26 2.6 19.0
9 Brake hose union bolt 23 2.3 16.5
0 Air bleeder valve 7.5 0.75 5.5
A Brake disc bolt (Front & Rear) 23 2.3 16.5
B Rear brake caliper mounting bolt 26 2.6 19.0
C Rear brake master cylinder mounting bolt 10 1.0 7.0
D Front footrest bracket mounting bolt (M8) 26 2.6 19.0
(M6) 11 1.1 8.0
E Swingarm pivot nut 100 10.0 72.5
F Rear shock absorber mounting nut
(Upper & Lower)
29 2.9 21.0
G Rear axle nut 100 10.0 72.5
To Next Page
Loading...
Need help?
General
