9-74 CHASSIS
BRAKE PAD REPLACEMENT
• Remove the brake-lock arm
1 and spring
2.
• Disconnect the brake-lock cable
3. (9-85)
• Remove the caliper.

• Remove the pad mounting pins
4, and then remove the
brake pads.
• Clean up the caliper especially around the pistons.
• Inspect the pad mounting pins for wear. If excessive wear is
found, replace the mounting pins with new ones.
• Assemble the new pads
5, insulators
6 and shims
7.

Do not operate the brake lever while dismounting the
pads.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
To Next Page
Loading...
Need help?
General
