CHASSIS 9-41
REMOVAL
HANDLEBARS
• Remove the handlebar covers. (9-8)
• Remove the right switch box
1.
• Disconnect the brake switch coupler.
• Remove the front brake master cylinder
2.
• Remove the left switch box
3.
• Disconnect the brake switch coupler.
• Remove the rear brake master cylinder
4.
• Remove the handlebars.
STEERING STEM
• Remove the front panel. (9-8)
• Remove the front fork. (9-33)
• Remove the cable/harness guide
1.
• Remove the brake hose clamp
2.
NOTE:
Before removing the handlebars, loosen the steering stem head
nut to facilitate later disassembly.
• Remove the steering stem lower cover.