TM8100/TM8200 Service Manual TMAA10-01 Desktop Microphone 553
© Tait Electronics Limited June 2006
.
29.5 Circuit Description
The desktop microphone uses a dynamic microphone capsule and contains
a pre-amplifier (Q1) to boost the microphone level to that required by the
radio. Power for the pre-amplifier is provided by the electret microphone
bias circuit within the radio. R5 is used to adjust the gain.
PTT and hookswitch signals are combined onto one line and fed to the
control head PTT input of the radio.
Figure 29.2 Desktop microphone to radio interface
To Next Page
Loading...
Need help?
General
