To Next Page

To Previous Page

562 TMAA10-04 Remote PTT Kit and TMAA10-05 Hands-Free Kit TM8100/TM8200 Service Manual

2. In the VOX menu, choose On.

3. Press Select.

While VOX is on, the VOX indication may be

programmed to appear below the channel infor-

mation on your display.

Changing the

Sensitivity of VOX

You may need to change the threshold at which the radio detects your voice

and makes a call. To do this, you use the VOX Sensitivity menu.

1. Select Menu>Radio Settings>

Function Settings>VOX Sensitivity.

2. In the VOX Sensitivity menu, use the scroll keys

or to adjust the VOX sensitivity to the

desired level.

3. Press Done to save this setting.

32.2 Installation

Important Care should be taken to avoid routing any cables near vehi-

cle pedal controls, steering column and other moving parts.

Installing the

Remote

Microphone

1. Choose one of the three mounting options provided for the remote

microphone and determine its most appropriate location.

The mounting position of the microphone should be no more than

50cm (20 inches) from the user’s mouth.

2. Route the remote microphone cable so as not to distract the driver.

3. Mount the remote microphone in the chosen location and check

that the microphone and cable are clear of all the usual movements

performed by the user.

Installing the

Remote PTT

(TMAA10-04)

Important The remote PTT must be operable from a normal

driving position.

1. Secure the remote PTT in position using the velcro strap and plug the

remote PTT cord into the remote PTT extension lead.

A common position for the remote PTT is on the gear lever of

the vehicle.

Tait TM8110 Service Manual

Other manuals for Tait TM8110