Waveform display settings
This section contains concepts and procedures for displaying and removing a
waveform.
Displaying and removing a waveform
Use this procedure to turn on or off the display of each channel’s waveform.
To add or remove a waveform from the display, push the corresponding front-
panel channel Menu button.
If the selected channel is already active, pushing the channel Menu button
removes the waveform.
If the channel is not active, pushing the channel Menu button selects that
channel; another push removes the waveform from the screen.
If more than one waveform is displayed on the screen, selecting a channel draws
the corresponding waveform on top of all other waveforms.
TBS2000B Series Oscilloscopes User Manual 81
To Next Page
Loading...
Need help?
General
