Toro TX525 - Changing the Hydraulic Fluid

MAINTENANCE
3-6 Rev. 000 TX525 Service Manual
5. RemovetheLHsidegrill.
6. Cleantheareaaroundthellerneckofthehydraulic
tank.Removethehydraulictankcapanddipstick
(Fig.0011andFig.0012).
Fig 0011 PICT-8731
Fig 0012 PICT-8738
Changing the Hydraulic Fluid
Changethehydraulicuidevery400operatinghoursor
yearly.
Note: The hydraulic lter should be replaced when-
ever the hydraulic oil is changed.
1. Positionthetractionunitonalevelsurfaceandopen
thehood.
2. Raisetheloaderarm,installthecylinderlock,stop
theengine,andremovethekey.
3. Allowthetractionunittocoolcompletely.
4. Placealargedrainpan(capableofholding15
gallons)underthedrainplugonthefrontofthe
tractionunit(Fig.0010).
Fig 0010 PICT-8725