E6581697
F-52
6
6.17 Light-load high-speed operation function
f328 : Light-load high-speed operation
selection
f329 : Light-load high-speed learning
function
f330 : Automatic light-load high-speed
operation frequency
f331 : Light-load high-speed operation
switching lower limit frequency
f332 : Light-load high-speed operation
load waiting time
f333 : Light-load high-speed operation
load detection time
f334 : Light-load high-speed operation
heavy load detection time
f335 : Switching load torque during
power running
f336 : Heavy-load torque during powe
running
f337 : Heavy-load torque during
constant-speed power running
f338 : Switching load torque during
regenerative braking
Refer to additional Instruction manual for details.
6. 18 Braking function
6.18.1 Brake sequence control
f340 : Creeping time 1
f341 : Braking mode selection
f342 : Load portion torque input
selection
f343 : Hoisting torque bias input
f344 : Lowering torque bias multiplier
f345 : Brake release time
f346 : Creeping frequency
f347 : Creeping time 2
f348 : Braking time learning function
• Function
These parameters can be used as brake sequences for lifts and similar equipment.
To ensure smooth operation, the motor produces enough torque before the brake is released.
Title Function Adjustment range Default setting
f340
Creeping time 1 0.00-10.00 (s)
0.00
f341
Braking mode selection
0: Disabled
1: Forward winding up
2: Reverse winding up
3: Horizontal operation
0
To Next Page
Loading...
Need help?
General