Toshiba TOSVERT VF-MB1 User Manual

E6581697
F-119
6
6.33 Communication function
6.33.1 Setting of communication function
f800 : Baud rate f814 : Communication command 
f801 : Parity point 2 frequency
f802 : Inverter number f829 : Selection of communication
f803 : Communication time-out time protocol
f804 : Communication time-out action f856 : Number of motor poles for
f805 : Communication waiting time communication
f806 : Setting of master and slave for f870 : Block write data 1
communication between inverters f871 : Block write data 2
f808 : Communication time-out f875 : Block read data 1
detection condition f876 : Block read data 2
f810 : Communication command point selection f877 : Block read data 3
f811 : Communication command point 1 setting f878 : Block read data 4
f812 : Communication command point 1 frequency f879 : Block read data 5
f813 : Communication command point 2 setting f899 : Communication function reset
Warning
Mandatory
action
 Set the parameter Communication time-out time (f803) and Communication time-out action (f804).
If these are not properly set, the inverter cannot be stopped immediately in breaking communication and
this could result in injury and accidents.
 An emergency stop device and the interlock that fit with system specifications must be installed.
If these are not properly installed, the inverter cannot be stopped immediately and this could result in
injury and accidents.
Refer to the Communications Function Instruction Manual for details.

Toshiba TOSVERT VF-MB1 Specifications

General

Brand	Toshiba
Model	TOSVERT VF-MB1
Category	Inverter
Language	English