Toshiba TOSVERT VF-MB1 User Manual

E6581697
F-112
6
6.29.8 Canceling the operation command
f719 : Canceling of operation command
 Function
This parameter allows you to select operation command retained or operation command canceled,
when coast stop occurs due to standby terminal function (ST), coast stop command terminal function
or open between control terminal STO and +SU, and when under voltage in main circuit alarm occurs,
during panel operation or RS485 communication operation.
Parameter setting At coast stop Under voltage in main circuit alarm occurrence
＝
Operation command canceled Operation command retained
＝
Operation command retained
＝
Operation command canceled
Operation command retained :
Inverter restarts due to canceling coast stop at coast stop.
Inverter restarts due to supply power source again when the under voltage in main circuit alarm (
)
occurs.
Operation command canceled :
Inverter doesn’t restart after coast stop or occurring the under voltage in main circuit alarm (
).
Press RUN key to operate again in panel operation.
Switch to ON the operation command in RS485 communication operation.
Title Function Adjustment range Default setting
f719
Canceling of operation
command
0: Panel operation command canceled
(cleared)
1: Operation command retained
2: Panel/Communication operation
command canceled (cleared)
1
[Setup example of input terminal for standby terminal function and coast stop command function]
When it is assigned to the RES terminal.
Title Function Adjustment range Setting
f113
Input terminal selection 3A
(RES)
0-203 6: ST (Standby)
f113
Input terminal selection 3A
(RES)
0-203 96: FRR (Coast stop command)
Setting value 7, 97 are reverse signal.

Toshiba TOSVERT VF-MB1 Specifications

General

Brand	Toshiba
Model	TOSVERT VF-MB1
Category	Inverter
Language	English